Cat5e For Network Transmission
Category 5e and ISO 11801 2nd Edition Class D channel standards
2 Third party tested to Category 5e channel compliance.
Send Inquiry
Product Details ofCat5e For Network Transmission
Specification
Construction | Material | Nominal size |
Inner conductor | Copper/CCA | Φ0.48±0.005mm |
Insulation | Polyethylene PE | Φ 0.85±0.03mm |
Twisting | 2 cores to the pair | |
Rip cord | Nylon Material | |
Shielded | PET | |
Al foiled | ||
Drain wire | BC/TC/CCA | Φ0.4mm |
Outer sheath | PVC/ PE/LSZH | Φ 5.1±0.2mm (Thickness 0.55±0.05mm) |
Application
1 Meets or exceeds requirements of ANSI/TIA-568-C.2
Category 5e and ISO 11801 2nd Edition Class D channel standards
2 Third party tested to Category 5e channel compliance.
3 Used in station and all networking requirement(ISDN),ATM155Mbps,100Mbps TPDDI.
4 Certification: ISO9001; CE; ROHS; CPR
5 Standard: UL758,UL1581,UL444,TIA/EIA-568,CSA C22.2,ISO/IEC 11801,YD/T1019-2013
Electronic Characteristics
Impedance: 100± 15(ohms).
Rated Temperture: 75º C
DC Resistance unbalance(%): Max2.5
DC Resistance 20º C: 8.4(Ohms/100m)
Pair-to-Ground Capacitance Unbalance: 330(Pf/100m)
Transfer Impendance: Max 10 mohms/m@100MHz.
Installation Resistance: >5000MΩ *KM
Dielectric strength: DC 2500V 2S
Hot Tags: cat5e for network transmission, China, manufacturers, suppliers, factory, wholesale, custom, Vietnam, CAT6 1000ft Blue, LAN Cable Fluke Test Pass, UTP FTP CMPRated Cat5e Lan Cable, CAT5E OUTDOOR 24awg UTP FTP SFTP, cat6 cable Pure cupper, UTP CAT5e 24awg 4Pair LAN Cable
Send Inquiry
