Product Description

CAT5E U/UTP Ethernet RJ45 Patch cord, SNAGLESS Strain relief Boot, AWG26 Stranded
1. Cat5e UTP Patch cord, with two modelded RJ45 Plug 3u' Gold plated,
2. Unshielded twisted Cable, 2*2*AWG26 Cable, OD=5.2MM, OFC Copper conductor,
(CCA available as well).
3. Compliant with EIA/TIA 568B, EN50173, AND ISO/IEC 11801,
4. Connect way: 1: 1 or Crossover for option,
5. Excellent Fluke test data, low Attenuation and high NEXT, RL etc, Pass Fluke Patch cord test
6. Suitable for 100MHz High speed Data transmission, Gigabit Ethernet, TP-PMD,
7. UL or cUL Listed, compliant with CMX, CM, CMR
8. Have full series popular Strain relief Mould for Choice,

Features of patch cord CCA conductor short lan cable for router

Connects to all hardware destinations on (LAN) Local Area Network.

Best for 10 and 100 Base-T, and even 1000 Base-T networks.

Enhanced 350Mhz bandwidth for high-speed Data\Audio\Video and handle other intensive applicatios bandwidth.

Meets all Cat5e TIA/EIA-568B standards and exceeds the performance requirements of Category 5e.

For PC, Mac, Laptop, PS2, PS3, and XBox 360 for high speed Internet from DSL or Cable Internet.

Molded booted ends with strain relieves for reliability, Snag less.

50-micron gold plated connectors to insure a clean and clear transmission.

Connector(s): RJ-45 - male.

Type: Patch cable.

Ethernet cable basics:

The Ethernet cables for connectivity in most office and home environments rely on twisted wire pairs within an overall cable - Cat 5, Cat 6 and Cat 7 all used this format. Twisting the wires together enables the currents to balance, i.e in one wire the current is moving in one direction, and int he other wire of the pair the current is going in the other, enabling the overall fields around the twisted pair to cancel.

In this way, data can be transmitted over considerable lengths without the need for undue precautions.

As several twisted pairs are contained within a particular network cable, the number of twisted per unit length is arranged to be different for each pair - the rate being based on prime numbers so that no two twists ever align. This reduces crosstalk within the cable.

The Ethernet cables are available in a variety of lengths as patch cables, or the cable itself is available for incorporating into systems, buildings, etc. The terminations can then be made to the required connector using a crimp tool. These network cables are available in a variety of lengths - long Ethernet cables are available, some of the longest being up to 75 metres.

Earlier network cables were unshielded, but later ones were shielded to improve the performance. For example an unshielded twisted pair (UTP) cable may be satisfactory for a short run between a computer and router, but a foil shielded cable, FTP, is best longer runs or where the cable passes through areas of high electrical noise.

Hot Tags: Patch Cord CCA Short Lan Cable For Router, China, manufacturers, suppliers, factory, wholesale, custom, Vietnam, CAT7 FTP PATCH CABLE, CAT6 FTP PATCH CABLE, PATCH Cord, CAT6 UTP PATCH CABLE, CAT5E UTP PATCH CABLE, CAT6A FTP PATCH CABLE