+8618657514717

What Is Called Shielded Cable? What Is The Cable Shielding Layer

Sep 23, 2020

What is called shielded cable? What is the cable shielding layer?

 

I. Cable shielding layer

1. Add a shielding layer of semi-conductive material on the surface of the conductor, which is equipotential with the shielded conductor and in good contact with the insulating layer, so as to avoid partial discharge between the conductor and the insulating layer. This layer of shielding, also known as the inner shielding layer. There may also be a gap between the insulation surface and the sheath. When the cable is bent, the insulation surface of oil-paper cable is prone to crack, which are all factors causing partial discharge.

2. Add a shielding layer of semi-conductive material on the surface of the insulation layer. It has good contact with the shielded insulation layer and is equipotential with the metal sheath, so as to avoid partial discharge between the insulation layer and the sheath.

In order to evenly conduct the conductor core and insulate the electric field, medium and high voltage power cables of 6kV and above are generally provided with conductor shielding layer and insulation shielding layer, and some low-voltage cables are not provided with shielding layer. The shielding layer has semi-conductive shielding and metal shielding two kinds.

2. Shielded cable

The shielding layer of this kind of cable mostly USES the metal wire woven into the net or USES the metal film, has the single shield and the multi-shield many different ways. A single screen is a single screen or film, in which one or more wires can be wrapped. The multi - shielding method is a plurality of shielding networks, shielding film in a cable. Some are used to isolate electromagnetic interference between wires, and some are double shielded to enhance the shielding effect. The shielding mechanism is to ground the shielding layer so as to isolate the inductive interference voltage of the external connection to the conductor.

1. Semi-conductive shielding

The semi-conducting shielding layer is usually arranged on the outer surface of the conducting wire core and the insulation layer, which are respectively called the inner semi-conducting shielding layer and the outer semi-conducting shielding layer. The semi-conductive shielding layer is composed of a semi-conductive material with very low resistivity and relatively thin thickness. The inner semi-conductive shielding layer is to uniform the electric field on the outer surface of the conductor and avoid partial discharge of the conductor and insulation caused by the unsmooth surface of the conductor and the air gap caused by the conductor stranded. The outer semi-conductive shielding layer has a good contact with the outer surface of the insulation layer, and is equipotential with the metal sheath, so as to avoid partial discharge with the metal sheath due to cracks and other defects on the cable insulation surface.

2. Metal shielding

For medium and low voltage power cable without metal sheath, in addition to the installation of a semi-conductive shielding layer, but also to increase the metal shielding layer. The metal shielding layer is usually made of copper tape or copper wire wrapped, which mainly plays the role of shielding electric field.

 

 

 

Because the current through the power cable is relatively large, the magnetic field will be generated around the current, in order not to affect other components, so add a shielding layer can shield this electromagnetic field in the cable. Moreover, the cable shielding layer can play a certain role in grounding protection. If the cable core wire is damaged, the leakage current can flow along the shielding laminar flow, such as grounding grid, to play a role in safety protection. This shows that the role of the cable shielding layer is still very large.


Send Inquiry