Many people in the transportation of wire and cable and in the warehouse storage process, if not strictly regulated management, such as rough transportation, wet warehouse, snake worms and other harsh environments are easy to cause cable damage, it is easy to affect the installation after serious Safe to use. Therefore, today we have collected six major precautions regarding the transportation and storage of wire and cable, and we hope to help you.
1. When storing the electric wires, it is strictly forbidden to contact with acid, alkali and mineral oil, and should be stored separately from these corrosive substances;
2. There shall be no harmful gases in the warehouse where the wires are stored, which may damage the insulation and corrode the metal;
3. As far as possible, avoid storing the cable in the open air in a bare way, and the wire tray is not allowed to lay flat;
4. During the storage period, the wires should be rolled regularly (three months in summer and extended in other seasons as appropriate). When rolling, the storage tray will be rolled upside down to prevent the bottom surface from being rotted. Always pay attention to the integrity of the wire cap when storing it;
5. The storage period of the wire is limited to the ex-factory period of the product, generally not more than one and a half years, and the length of the *** is not more than two years;
6. It is strictly forbidden to drop cables or cable trays with cables from high places during transportation, especially at lower temperatures (generally around 5 °C and below). Throwing or dropping cables may cause insulation and sheath cracking;
7. When lifting the package, it is strictly forbidden to hoist several plates at the same time. In vehicles, ships and other transportation tools, the cable reels should be fixed by suitable methods to prevent collision or tipping over to prevent mechanical damage to the cable.
